evo VI stock boost

[user4649]

Hello everyone. I have JDM v6 Evo fully stock with a stock exhaust and everything. I was wondering what boost pressure is it running now? is it streight line pressure or it goes up first and then goes down at higher rpms? Also what is the whp and crank hp my evo should have in stock version? And the last question please tell me the list of mods needed to upgrade in this evo without upgrading turbo and injectors to get the most out of it on pump gas and how much HP can I achive? Thank you.

[lloyd@jrd]

Hi



E6 GSR

Standard boost 1.1 bar

Standard bhp 276 at the flywhee

Without changing the turbo/injectors,would recoment the following:

3" Cat Back Exhaust
De-Cat
3" Downpipe
Turbo Elbow
Cam Kit 264 or 272
Suction Kit
Blow Off Valve
Intercooler Hard Pipe Kit
255 Ltr Fuel Pump
Boost Controller
Stand alone ECU

This would be able to run on either 95 ron or 98 ron depending upon what you have the car mapped and would expect to see either side of 400bhp at the flywheel depending upon the individual car.But a as a cheap upgrade with noticeable gains would recomend upgrade the turbo to 10.5 TME/RS spec.

Hope this helps

Lloyd

[j30l]

mate

To the site

[mad monk]