Boost Controller Install - NO NC COM

Im installing a Greddy Profec B Spec II in to my Evo IV. I dont have an external wastegate so Im using the NO and COM connectors on the solenoid. What needs to happen to the NC connection? Do I need to block it off or just leave it open to atmospheric pressure.

I read the Apexi AVC-R online manual which say the NC should be open to atmosphereic pressure.

Thoughts please

[Rich@RGMotorsport]

just leave it

[pjw]

Originally Posted by Rich@RGMotorsport

just leave it

just as rich said leave it open.

[petbeemer]

Originally Posted by nianlala

Im installing a Greddy Profec B Spec II in to my Evo IV. I dont have an external wastegate so Im using the NO and COM connectors on the solenoid. What needs to happen to the NC connection? Do I need to block it off or just leave it open to atmospheric pressure.

I read the Apexi AVC-R online manual which say the NC should be open to atmosphereic pressure.

Thoughts please

same solenoid on both the profec and avcr m8 so what goes for one goes for another