|
| Register | FAQ | Members List | Calendar | Mark Forums Read |
|
#1
|
|||
|
|||
|
Prob with HKS SSQV, over revs, any ideas?
Strange one this, and its only really come to light after my Ecutek remap.
I have the occasional prob where at low revs the car can stall, but I understand that's common. The main prob I’m having is if I’m pushing the car and change gear about 5-6k revs, I can back of the accelerator, and as I change gear the car continues to rev, right up to the limit! Then as you change gear technically you slip the clutch!! Anyone experienced this before?? |
|
#2
|
|||
|
|||
|
I hav an MR340 (11months old, 10k on the clock, no mods) that does the stalling thing but only if i pull away from standstill (with not much revs) then anchor up quick (like when i'm waitin at a roundabout). I read on MLR that a lotta peeps had that prob so i just put up with it. Apparently there was sum dealer fit mod that cured it sum sed.
I also used to get mild over rev between gear shifts but only at lower revs (say changin up between 2.5-3.5k) have not noticed it when changing up nearer the limit like u sed. Again i read this happenin to a lot of other 8's and i recall they were MR's. Either i'm not noticing it now or it's stopped on my car.
__________________
Still enjoying my EVO |
![]() |
| Thread Tools | |
| Display Modes | |
|
|