Balance shaft

[evo3ben]

Done alot of poking and hunting around to find out what the vibration is coming from under my car and the final conclusion is my balance shaft is 180 degrees out
How do you check to be 100% sure and how do you rectify the problem please.

[user778]

sorry i dont know how lol.. but u could always get the kit to remove it

[user1215]

Bloody reposts I'm turnin in to a whore!!

[user1215]

Found this on the net ben

Simply rotate the mark on the oil pump sprocket until it is pointing straight up, and let it go. If the sprocket rotates towards (counterclockwise) the timing mark on the engine, the oil pump sprocket is aligned correctly. If it rotates away (clockwise) from the mark, spin the sprocket a full turn and test again, and it should properly rotate towards the mark now.

Got it from here.....http://www.vfaq.com/mods/timingbelt-2G.html

Hope it helps mate..

Chris.

[evo3ben]

cheers mate. Booked in with Gaz @ CPP on monday so am gonna get everything checked and rectified there. Im not to confident playing around with the timing and taking the cam belt off so will let a pro do it. cheers.

[user1215]

Originally Posted by evo3ben

cheers mate. Booked in with Gaz @ CPP on monday so am gonna get everything checked and rectified there. Im not to confident playing around with the timing and taking the cam belt off so will let a pro do it. cheers.

I dont blame you mate, i would leave it to the pro's too ops: