Lancer Evo Forums


Go Back   Lancer Evo Forums > Evo.net Trader Forum > The Traders > AP Tuning

Reply
 
Thread Tools Display Modes
  #1  
Old 11-21-2006, 09:56 PM
Gary@APT Gary@APT is offline
Junior Member
 
Join Date: Sep 2006
Posts: 23
VEMS Wideband O2 & EGT Gauge....


Versatile Engine Management System
VEMS Wideband O2 & EGT Sensor

With a retail price of £174.99(+VAT) you have to ask yourself: "Can I afford not to "know"
what's happening with my engine's fuel and ignition?"



Knowledge "is'' Power. No matter if you have a high-boost track monster, nitrous oxide boosted drag racer or a fast road car ''knowing'' your Air fuel ratio is an essential factor in getting the optimum power and reliablity from your engine. Add to this the essential information you can gain about your ignition timing from the Exhaust Gas Temperature (EGT) you can ensure that your safely within your engine components operating range and limit the danger of detonation. So take the guess work out of the engine management setup.The VEMS Wideband 02/EGT sensor will give you the information you require to obtain the optimum performance when mapping your engine management system and give you peace of mind when ever you use that performance. [INSERT AFR GRAPH HERE] Up until recently Wide Band Systems were beyond the means of most of us, the controller costs were high, and the sensors were delicate and prone to failure. Needing a Wide band that they could use for their own engine management project, the VEMS team designed a microprocessor controlled gauge that uses the low-cost, reliable Bosch LSU-4 sensor, and because the EGT and AFR are so interlinked they decided to package them in a single gauge.



The LSU-4's range is wide enough to accurately measure the AFR of the richest alcohol engines to through to free-air. The VEMS Wideband electronics and software controlling the LSU-4 sensor is accurate enough to measure to within 1% of a commercial 6-gas analyser. The control and display electronics fit inside a standard 52mm gauge, which makes for a simple installation as there is no additional control module. There is no setup or configuration necessary. Just connect the fused power and ground cables to suitable points in your car and plug in the Wideband and optional EGT sensor.



Kit description:
VEMS Wideband consists of:
AFR Gauge in a standard 52mm fitment.
Bosch LSU-4 Lamba sensor.
Complete wiring loom with fused power cable, sensor and multifunciton cable.
Gauge mounting hardware.
Optionally: Exhaust Gas Temperature sensor with temperature compensated cable.

Features:
Wideband Oxygen sensor control and display.
Exhaust Gas Temperature sensor display.
Narrow Band sensor output to provide your ECU with the standard lambda feed back it needs for its closed-loop operation.
RPM input to provide context for datalogging.
Boost sesnsor input for datalogging and
5A solenoid driver, to control Boost or N2O solenoid.
Serial (RS232) connection providing datalogging to PC and Field upgradeable software.


VEMS Wideband O2/EGT Gauge complete with Wideband sensor. £205.61 incl. VAT

K-Type thermocouple including temperature compensated cable
and plug, threaded bung and compression fitting. £59.00 incl. VAT
Reply With Quote
  #2  
Old 11-27-2006, 05:18 PM
saculus saculus is offline
Junior Member
 
Join Date: Nov 2006
Posts: 2
Why didn't just call him about it?
__________________
2005 Mustang Wrecked
Reply With Quote
  #3  
Old 01-19-2007, 05:44 PM
Kkej1IS5Yf Kkej1IS5Yf is offline
Junior Member
 
Join Date: Jan 2007
Posts: 2
whatever happened to jon... does he come here anymore?
__________________
Akon Album Cover
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 04:50 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.